The Keter Newton 757 is a 7.5 x 7 ft resin shed with a peaked roof, wide double doors, two windows and a skylight. In the US, Keter now sells it as the Newton Plus 7.5×7 (item 260207), and its diagram and assembly manual are still labeled Newton 757. It is in stock at Keter and listed online at Tractor Supply. Its old Amazon listing is gone. This review covers the specs, what owners report, and what to know before you build one.
How we reviewed it: this review is based on Keter’s product page, Newton 757 assembly manual and warranty, and owner reviews on Keter’s site and Home Depot, checked in October 2026. More on our process.

The Short Answer
On paper, the Newton 757 is a strong 7 ft class shed: 303.7 cubic feet, a roof rated for 30 lb of snow per square foot, a 90 mph wind rating, and a 10-year limited warranty. Owners like how it looks. The catches come from owners of the larger Newton sizes: thin walls that do not take shelves or hooks well, missing or damaged parts in some boxes, and one report of a shed wrecked in a windstorm. Build it on a proper foundation, screw it down, and plan your storage around the walls rather than on them.
Check the Newton Plus 7.5×7 at Keter
Keter Newton 757 Specs
| Exterior | 90.5 in wide x 88.11 in deep x 96.8 in high |
| Interior | 79.1 in wide x 79.1 in deep x 92.1 in high at the peak |
| Capacity | 303.7 cu ft |
| Door opening | 54.65 in wide, double doors |
| Light | Two windows and a skylight |
| Ventilation | Vents at the front and rear gable peaks |
| Snow load | 30 lb per sq ft |
| Wind | Rated for winds up to 90 mph |
| Walls | Double-wall resin with steel reinforcement, EVOTECH wood-look texture |
| Floor | Included |
| Lock | Lockable doors |
| Weight | About 333 lb |
| Foundation | Required; at least 82.7 x 86.2 in |
| Assembly | 2 people, about 5 hours, per Keter |
| Warranty | 10-year limited |

Keter says the double doors can be installed on either side, but once the shed is built, that choice cannot be changed. Decide which way the doors face before you start.
What Fits Inside
The inside is 79.1 inches square, about 6.6 ft each way, with 92.1 inches of headroom at the peak. The 54.65 inch doorway is wide enough for a push mower, bikes and a wheelbarrow. Keter’s page suggests bikes, lawnmowers and garden tools.
There are no shelves or hooks included. Keter sells a 40 inch shelf kit, a wall tool organizer and a corner tool rack for its sheds. Owners warn that the walls are thin plastic with the steel hidden inside, which leaves few solid places to fix anything. One owner of the 11 ft Newton says a wall bowed out and pulled away from the roof after hanging bikes on it. Freestanding shelving is the safer plan.
Foundation and Assembly
Keter lists a foundation as required. The manual recommends a wood or concrete base at least 82.7 x 86.2 inches, level, with room to walk around the shed while you build. It strongly recommends screwing the shed floor to the foundation at the pre-marked points. The screws are not included.
- Tools: screwdriver, electric screwdriver, drill, rubber mallet, ladder and gloves
- People: two; the manual says assembly requires two people
- Time: Keter says about 5 hours. Owners of the 7.5×7 report 4 to 5 hours, and owners of the larger sizes report 6 to 8 hours after the foundation was built
- Leveling: if the shed is not level, the manual says to shim it at the sides or the door
Check every part before you start. If parts are missing or broken, Keter’s manual says not to return the shed to the store but to contact Keter’s customer service (1-888-374-4262 in the US). Several owners found damaged or missing parts partway through the build.
What Owners Say
Owner feedback on the 7.5×7 itself is thin. Keter’s product page shows 4.3 out of 5 from 6 reviews, and all six reviewers are marked as having received a discounted item, so none are independent purchases. Tractor Supply’s listing shows 4.2 from 5 reviews, which repeat reviews from Keter’s site. The larger pool is at Home Depot, which does not sell the 7.5×7 but sells the same Newton Plus design in longer sizes.
| Size | Rating | Reviews |
|---|---|---|
| Newton Plus 7.5×11 | 3.6 | 77 |
| Newton Plus 7.5×15 | 3.3 | 15 |
| Newton Plus 7.5×13 | 3.0 | 13 |
| Newton Plus 7.5×9 | 2.9 | 12 |
What they like
The look comes up most. One owner was surprised how convincing the wood look is, and others call it clean and modern. Some owners say it stayed dry in rain, and one says it was very stable once built on a concrete pad. A 7.5×7 owner says the wide doors make it easy to move a mower, bikes and ladders in and out.
What they do not
- Thin walls. Owners say the walls flex, are hard to fix shelves or hooks to, and that items should not lean against them.
- Wind. One Home Depot owner says a windstorm took the roof off and bent the frame after one summer and winter. An owner of the 7.5×7 says it needs to be securely anchored to feel safe in strong winds.
- Parts. Missing, damaged or wrong parts are a recurring complaint, including door panels without handle holes.
- Instructions. The manual covers several sheds, and some owners found the order of steps confusing. Roof panels are the hardest part to line up.
- Security. One owner says the door latch is held by two screws into thin plastic and would not stop a determined thief.
Is It Weatherproof?
Keter rates the Newton 757 roof for 30 lb of snow per square foot and the shed for winds up to 90 mph, and calls it weather resistant. The warranty, though, does not cover damage from storms, hail, tornadoes, hurricanes or floods. In windy areas, the manual’s advice to screw the floor to a solid foundation is the most important step in the build.
Warranty
Keter gives the Newton 757 a 10-year limited warranty from the date of purchase. Keter will replace, at its discretion, a product or part that fails because of a structural defect, faulty workmanship or fading of color. It does not cover:
- Damage from incorrect assembly or storage, misuse or wrong cleaning products
- Normal wear, cuts, scratches, impacts or accidents
- Acts of nature such as hail, storms, tornadoes, hurricanes, floods and fire
- Commercial or public use
The warranty is for the original buyer only and does not transfer. Keep your receipt and register the shed with Keter.
Who Should Buy It
- Good fit: a yard where looks matter, storage for a push mower, bikes and garden tools, and a buyer ready to build a proper base and anchor the shed
- Poor fit: very windy or exposed sites without a solid foundation, anyone planning to hang heavy tools on the walls, or anyone who needs real security
Other Sheds This Size
- Keter Artisan 2.0 7×7: a single-slope roof, a row of windows, a 40 lb snow rating and a 10-year warranty, at 85 x 85.8 inches
- Lifetime 6411: 8 x 7.5 ft with five shelves and two pegboard strips included
- Rubbermaid 7×7: double-wall resin with the floor included
For more options, see our best storage sheds guide and our plastic vs wood vs metal shed comparison.
Final Word
The Newton 757 has the specs and the looks: over 300 cubic feet, a wide doorway, a strong snow rating and a 10-year warranty. Owner reports on the larger Newton sizes are mixed, and the problems cluster around thin walls, missing parts and wind. If you buy one, build a level wood or concrete base, screw the shed to it, check every part before you start, and use freestanding shelves.
Check the Newton Plus 7.5×7 at Keter
Frequently Asked Questions
Is the Keter Newton 757 the same as the Newton Plus 7.5×7?
Keter’s US site sells the 7.5 x 7 ft Newton as the Newton Plus 7.5×7, item 260207. Its dimension diagram and assembly manual are labeled Newton 757.
What are the Keter Newton 757 dimensions?
Keter lists it at 90.5 inches wide, 88.11 inches deep and 96.8 inches high outside, and 79.1 x 79.1 inches inside with 92.1 inches of headroom. It holds 303.7 cubic feet.
How much snow and wind can the Newton 757 handle?
Keter rates the roof for 30 lb per square foot of snow and the shed for winds up to 90 mph. Storm damage is not covered by the warranty, so anchor it to a foundation.
Does the Keter Newton 757 need a foundation?
Yes. Keter lists a foundation as required. The manual recommends a level wood or concrete base at least 82.7 x 86.2 inches and strongly recommends screwing the floor to it. Screws are not included.
How long does the Keter Newton 757 take to assemble?
Keter says two people and about 5 hours. Owners report 4 to 8 hours, depending on the size and their experience.
Can you hang shelves in the Keter Newton?
Keter sells a shelf kit, a tool organizer and a corner rack for its sheds, but owners say the walls are thin and hard to fix things to. One owner of a larger Newton had a wall bow out under hanging bikes. Freestanding shelves are safer.
What is the warranty on the Keter Newton 757?
A 10-year limited warranty covering structural defects, faulty workmanship and color fading. It excludes storm and hail damage, incorrect assembly, misuse and commercial use, and it does not transfer to a new owner.
Where can I buy the Keter Newton 757?
Keter sells it directly as the Newton Plus 7.5×7, and Tractor Supply lists it online. The old Amazon listing has been removed, and Home Depot carried the 7.5×9 and larger Newton Plus sizes, but not the 7.5×7, when we checked in October 2026.